Baofeng Uv 5R Hack. These are my recommended brands. To perform a vfo reset.

To change it to english, follow these steps: To perform a vfo reset. The operative word being 'enter'.
Outside Of The Above Range, The Radio Would Either Not Transmit Or Was Unstable.
Communication at the retreat, off the grid, or on the farm is essential and does not have to be extremely expensive or overly complicated. The programming data on the b side will not be saved. 'opening up' the radio with a software hack:
Other Then That, The Two Radios Have The Same Rda1846 Chip That Is Controlled By A Cpu.
So, to address this limitation, you can add the missing other half of the antenna to the radio yourself. First you’ll need to pull a copy of the existing config from your radio to your computer. Most of the chinese made radios, e.g.
This Software Is Used For.
1.turn on the radio and press the menu button. Install chirp (daily build) 3. A large number of people took photos of the url.
And While You’re At It […]
Press on the [band] button to receive a frequency band. For 2m, this would be about 19.5″, for 1.25m, it would be 11.5″, and for 70cm, it would be about 6. I brought it along to the club meeting and it had a lot of interest.
Open/Run Chirp, Connect Your Baofeng And Plug It Into An Usb Port On Your Computer.
To perform a vfo reset. Extremely popular, the baofeng is a compact, handheld radio. Save the changes by pressing the menu key again.