How To Light A Pilot Light On A Carrier Furnace. The pilot light in a gas furnace is a continuously burning flame that ignites the burners. Pilot light doesn't light on a carrier 58ss furnace.
The pilot flame should light immediately. Use a lighter to light your pilot light. Set the reset switch to off.
When The Pilot Light Is Hot Enough And Working Correctly, The Main Gas Valve In The Pilot Assembly Is Kept Open By What’s Called A Thermocouple.
After finding the manual, it’s time to locate the pilot switch. Turning the control knob to “pilot” does just that. If your furnace pilot light goes out, it doesn't always mean a costly repair.
How To Relight A Pilot Light:
Light a lighter or match, then push in the reset button. Next, simply turn that knob until it is. How to light the pilot light to your furnace.
To Locate The Pilot Light On A Gas Furnace, You First Have To Remove The Access Cover, Which Usually Just Lifts Off.
On most furnaces, you’ll spot a small valve near the bottom of the unit with three positions: The pilot light in a gas furnace is a continuously burning flame that ignites the burners. The furnace's pilot light is usually positioned at the bottom of the unit by a knob.
Turn Off The Furnace’s Gas Valve.
Turn the knob on your furnace to “off.”. Now, turn the knob to the pilot. Instead they use electronic ignition systems that light only as needed.
Find The “Reset” Button While You Are Waiting.
Turn the knob to “pilot” and hold down the “reset” button. But pilot does not light; In this episode of repair and replace, vance shows how to relight the pilot light, in a standing pilot furnace.
