How To Paint Over Stained Wood Doors. Apply it evenly across both sides and around all edges using a good quality brush. Once this is done, clean the wood with a clean tack cloth to remove all of the dirt.
This may include handles, knobs or metal trimming. This should usually take approx. Paint the other side of the door with primer and let it dry if both sides of the door will be painted.
Give The Door A Very Good Sand And Then Use A Product Called Zinsser Bin (Red Can) X2 Coats Then Once This Has Been Applied And Is Dry Apply A Water Based Undercoat And The A Water Based Top Coat Of What You Want To Use I Would Use The Aqua Range From Jonstones Which Is Good.
Here is the stained door before we painted it white. Sand and tape off hardware or remove hardware. You do not need to sand off all of the stain, just enough to reduce the gloss and allow the paint to grab better.
Keeping This In Consideration, Can You Paint Over A Stained Door?
Shinny glossy surfaces are usually difficult. Avoid using a cleanser or chemical as it will not let the primer adhere onto the door. It helps to protect the wood surfaces more effectively.
While Sanding Down To Bare Wood Is Not Necessary, Sanding Through.
**may need primer if your door has never been painted. Then, follow these general preparatory steps for painting over stain: Let each coat dry thoroughly before applying the next.
When Applying The Primer, Use A Roller Or Brush To Obtain The Best Results.
First, you would need to sand down the surface area really well with medium grit sandpaper. Apply a second coat of paint to the same side and let it dry. This may include handles, knobs or metal trimming.
If You Are Able To Remove The Door And Hinges And Paint The.
I use frog tape to tape around areas that i do not want to get paint on like the hinges. Sand and clean the area again. Prime paint over your stained wood with a paint primer first.
